The Building Safety (Remediation of Unsafe Cladding etc) Bill: what you need to know

Almost a decade after the Grenfell Tower tragedy, the government continues to deal with the consequences of unsafe cladding on residential buildings. Despite legislative reforms, including the introduction of the Building Safety Act 2022 (BSA), many residents remain in buildings with fire-safety defects and face uncertainty as to when remedial works will be completed, who will bear the costs, and whether homes will be made safe.

The Building Safety (Remediation of Unsafe Cladding etc) Bill was introduced on 14 October 2026. It seeks to identify responsible parties more effectively, expediate remediation works, enable developers to recover costs from manufacturers, and reinforce accountability through civil and criminal punishment.

Identifying buildings and responsible parties

The bill proposes a new register of ‘medium-rise’ residential buildings in England between 11 and 18 metres in height. The register is intended to quantify the extent of unsafe cladding within this category of buildings and assist in identifying affected properties.

It also seeks to address the difficulties regulators face in identifying responsible parties where buildings are held through complex ownership structures. Certain public authorities will be given powers to require information about the building ownership, including beneficial ownership, so that they can pursue the appropriate parties.

New duties to assess, mitigate and remediate

Although building owners are responsible for keeping their buildings safe, the current regime does not impose a clear and general duty requiring responsible entities to remediate unsafe cladding. The bill therefore proposes express statutory duties requiring responsible entities to assess, mitigate and remediate external wall fire-safety risks.

A responsible entity is generally the party with the relevant repairing obligation and may include a freeholder, a leaseholder, a right to manage company, or a resident management company.

The new duties will generally apply to residential buildings that are at least 11 metres high or have at least five storeys. They will also cover historic fire-safety risks in buildings completed before 28 June 2022. Buildings subject to the developer remediation contract will be excluded because equivalent obligations already apply to participating developers.

The bill introduces three principal duties:

  1. a duty to assess;
  2. a duty to mitigate; and
  3. a duty to remediate.

Duty to assess

Responsible entities will be required to ensure that relevant buildings are assessed for external fire-safety risks within 12 months of the bill receiving royal assent. Where recommended by the initial fire risk assessment, a fire risk appraisal of external walls (FRAEW) must be undertaken. If the FRAEW identifies the need for remedial works, the responsible entity will need to publish a remediation compliance plan within 15 months of royal assent, setting out the remediation strategy and a timetable for completion of the works.

Duties to mitigate and remediate

If an assessment identifies a risk requiring action, the responsible entity will be required to implement appropriate interim measures. The bill also seeks to ensure that remediation and any necessary remedial works commence as soon as reasonably practicable. To that end, it imposes a clear duty on those responsible to permanently remediate unsafe cladding in accordance with the recommendations set out in the relevant FRAEW.

Claims against construction product manufacturers

The government has stated that it has committed £5.15 billion towards the remediation of unsafe buildings in England, while developers that have signed the developer remediation contract have contributed a further £4.2 billion. To date, however, construction product manufacturers have not been required to make a contribution.

The bill therefore proposes amendments to the existing cause of action under section 149 of the BSA. These changes are intended to make it easier to bring claims against parties involved in the manufacture and supply of unsafe construction products, broadening the scope of potential liability. In doing so, the bill seeks to enable developers to recover remediation costs and ensure that those responsible for supplying unsafe products are held accountable for their role in building safety risks.

Enforcement powers and sanctions for non-compliance

The bill proposes a significantly strengthened enforcement regime, including new civil and criminal sanctions for non-compliance. These sanctions underline the seriousness of the risks addressed by the bill.

Most notably, the guidance to the bill states that a responsible entity that deliberately fails to remediate or mitigate relevant risks may face criminal prosecution, and up to two years in prison or a financial penalty of up to £500,000.

The remediation backstop

The bill proposes a ‘remediation backstop’ where a responsible party cannot be identified or fails to meet its remediation obligations. Under the proposed regime, a relevant public authority may step in to undertake the necessary works. A tribunal will be able to make a remediation management order authorising the public authority to carry out the works and recover the costs from the responsible party.

Changes to limitation

The bill also clarifies that applications for remediation orders, remediation contribution orders and building liability orders are not subject to limitation periods under the Limitation Act 1980. This may increase the scope for applications and reduce the risk of valid applications being defeated by arguments that they were brought outside an applicable period.

The future of the bill

The bill represents a significant development in the government’s response to unsafe cladding. It seeks to clarify responsibility of assessing and remediating affected buildings, strengthen regulators’ enforcement powers, improve routes of recovery and provide a backstop where responsible entities fail to act.

However, the bill remains at an early stage of the parliamentary process and may be amended before receiving royal assent. At the time of writing, it is at committee stage in the House of Commons, with the Public Bill Committee inviting written evidence and views until 8 December 2026, although early submissions are encouraged. The bill’s practical effect will also depend on the accompanying secondary legislation and guidance, including how the new duties will be implemented, monitored and enforced.

Our team has extensive experience advising on fire-safety defects in residential buildings and can assist building owners and developers in understanding the potential impact of the bill, navigating the wider regime, and preparing for the assessment deadlines.

This article was co-written by Maria Shcherbakovskaya, trainee solicitor in the construction advisory and dispute resolution team.

Related expertise